| LinkScan for Windows. Reference Manual.
| Section 26 |
LinkScan Quick Reference Card
This Quick Reference Card provides descriptions of many
LinkScan Options that are used relatively infrequently.
These commands may be entered using the Advanced Tab
on the Project Planning and/or System Options
Property Sheets.
| Access [1] |
Syntax: |
Access username : password : project-list : owner-list : menu-options |
| Category: Security |
Default: |
Access * : * : * : * : * |
| Type: Multi-valued |
Used by: |
linkscan.sys |
| |
Activates the Access Controls on the LinkScan Reports. Not enabled
by default; see references.
|
| |
| Autoencspace [1] |
Syntax: |
Autoencspace = boolean |
| Category: CustomScan |
Default: |
Autoencspace = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When Autoencspace = 1 LinkScan will automatically encode
any unencoded space characters in a URL as "%20" thereby mirroring
the behavior of Microsoft Internet Explorer. We do not recommend
the use of this option (since it masks real errors in the HTML
documents) but it has been provided in response to user requests.
|
| |
| Autohttp [1] |
Syntax: |
Autohttp = boolean |
| Category: File |
Default: |
Autohttp = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When Autohttp = 1 LinkScan will automatically attempt
HTTP access on any link that cannot be found/validated when
using File System Scanning.
|
| |
| Casesensitive |
Syntax: |
Casesensitive = boolean |
| Category: Basic |
Default: |
Casesensitive = 1 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When Casesensitive = 1 LinkScan assumes that all pathnames
are case-sensitive (normally appropriate when scanning Unix-based
servers). When Casesensitive = 0 LinkScan forces all pathnames
to lower case (normally appropriate when scanning Windows-based
servers).
|
| |
| Cgibinurl [1] |
Syntax: |
Cgibinurl = absolute-url |
| Category: System |
Default: |
Cgibinurl = Automatically set during installation |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the URL to the directory in which the LinkScan CGI scripts reside.
Required in order that the LinkScan CGI scripts can link to each other.
|
| |
| Checkmailto [1] |
Syntax: |
Checkmailto = boolean |
| Category: External |
Default: |
Checkmailto = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When Checkmailto = 1 enable active checking of mailto: links.
Several other items must be configured when using this feature.
See references.
|
| |
| Defaultpages [1] |
Syntax: |
Defaultpages = filename [, filename]... |
| Category: File |
Default: |
Defaultpages = index.html, index.shtml, index.htm, home.html, home.shtml, home.htm |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When configured to use File System Scanning and LinkScan encounters
a link to a directory without a specific filename, it search for
documents with these filenames (in the order specified).
|
| |
| Dispatchsort [1] |
Syntax: |
Dispatchsort = integer |
| Category: Dispatch |
Default: |
Dispatchsort = 1 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Defines the sort sequence for LinkScan Dispatch Reports.
1 = By referer; 2 = By status code; 3 = By links alphabetically
|
| |
| Displaylang |
Syntax: |
Displaylang = boolean |
| Category: CustomReport |
Default: |
Displaylang = 1 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Enable when scanning Japanese language websites. The following
META tag will be included in each of the LinkScan reports:
<meta http-equiv="Content-Type" content="text/html; charset=EUC-JP">
See also Jisencode.
|
| |
| Docsurl [1] |
Syntax: |
Docsurl = absolute-url |
| Category: System |
Default: |
Docsurl = Automatically set during installation |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the URL to the directory in which the LinkScan documentation resides.
Required in order that the LinkScan CGI scripts can link to the documentation
and associated images.
|
| |
| Editdoc [1] |
Syntax: |
Editdoc = URL |
| Category: CustomReport |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Adds a linking URL to the LinkScan Reports. These may include
the optional tokens !URL, !CAP or !STAT. The tokens are replaced
with %encoded strings containing:
The URL of the target resource
The Title or Caption (as appropriate) associated with the target resource
The Status Code of the target resource.
Editdoc = http://foo/bar.cgi?Url=!URL&Cap=!CAP&Status=!STAT
|
| |
| Editlink [1] |
Syntax: |
Editlink = URL |
| Category: CustomReport |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Adds a linking URL to the LinkScan Reports. These may include
the optional tokens !URL, !CAP or !STAT. The tokens are replaced
with %encoded strings containing:
The URL of the target resource
The Title or Caption (as appropriate) associated with the target resource
The Status Code of the target resource.
Editlink = http://foo/bar.cgi?Url=!URL&Cap=!CAP&Status=!STAT
|
| |
| Excludecookie |
Syntax: |
Excludecookie expression |
| Category: Scope |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Cookies matching expression are completely
ignored by LinkScan. Expression must either match the
cookie name OR the following semi-colon delimited
string of cookie attributes:
"domain;port;path;cookiename;cookievalue;expires;setbypage"
Excludecookie [^;]*;[^;]*;[^;]*;[^;]*;SESSIONID
|
| |
| Execute |
Syntax: |
Execute relative-path-expression |
| Category: CustomScan |
Default: |
Execute cgi-bin/, Execute (?i).*\.(cgi|asp)$ |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Links matching relative-path-expression are accessed using
Network (HTTP) Scanning.
|
| |
| Expandssi [1] |
Syntax: |
Expandssi = boolean |
| Category: File |
Default: |
Expandssi = 1 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When Expandssi = 1 and File System Scanning is enabled
LinkScan will process Server Side Includes (SSIs) constructed
using the Apache Include Virtual conventions.
|
| |
| Extraheader [1] |
Syntax: |
Extraheader http-header |
| Category: CustomScan |
Default: |
Extraheader User-Agent: LinkScan Enterprise/12.3 Windows |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Configures additional HTTP headers that LinkScan will send with every request.
Mainly used to emulate different browser types.
Extraheader User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)
|
| |
| Extrahit [1] |
Syntax: |
Extrahit relative-path |
| Category: CustomScan |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Instructs LinkScan to access the specified URL at the start
of a scan. May be used to submit forms with specified data values.
Note: with Extrahome, LinkScan will access the specified page
*before* the start of a scan *and* a second time during the scan.
With Extrahit, LinkScan will access the specified page only once,
during a scan. See example and references.
Extrahit cgi-bin/postscript.cgi??Name=Malcolm%20Hoar&Password=confidential
|
| |
| Extrahome [1] |
Syntax: |
Extrahome relative-path |
| Category: CustomScan |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Instructs LinkScan to access the specified URL at the start
of a scan. May be used to submit forms with specified data values.
Note: with Extrahome, LinkScan will access the specified page
*before* the start of a scan *and* a second time during the scan.
With Extrahit, LinkScan will access the specified page only once,
during a scan. See example and references.
Extrahome cgi-bin/postscript.cgi??Name=Malcolm%20Hoar&Password=secret
|
| |
| FTPPass [1] |
Syntax: |
FTPPass = password |
| Category: External |
Default: |
FTPPass = [email protected] |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the password to use when validating links to FTP sites.
|
| |
| FTPUser [1] |
Syntax: |
FTPUser = username |
| Category: External |
Default: |
FTPUser = anonymous |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the username to use when validating links to FTP sites.
|
| |
| Fetchext [1] |
Syntax: |
Fetchext = boolean |
| Category: External |
Default: |
Fetchext = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Instructs LinkScan to fetch the document bodies when checking
External links. Normally used in conjunction with the LinkScan
Profiler.
|
| |
| Followext [1] |
Syntax: |
Followext = boolean |
| Category: External |
Default: |
Followext = 1 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When Followext = 1 LinkScan follows redirections when scanning
External links.
|
| |
| Followframes |
Syntax: |
Followframes = boolean |
| Category: CustomScan |
Default: |
Followframes = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When Followframes = 1 LinkScan will always follow links
within framesets (regardless of any Nofollow commands).
|
| |
| Gsmchangefreq [1] |
Syntax: |
Gsmchangefreq = string |
| Category: CustomScan |
Default: |
Gsmchangefreq = weekly |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Update frequency for XML Google Sitemap.
|
| |
| Gsmlevels [1] |
Syntax: |
Gsmlevels = integer |
| Category: CustomScan |
Default: |
Gsmlevels = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Maximum levels to include in XML Google Sitemap.
|
| |
| Homedir [1] |
Syntax: |
Homedir = absolute-path |
| Category: File |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Sets the absolute pathname to the directory/folder containing the
root of the target website. Only applicable when File System Scanning
and Orphan File detection are enabled. Note that Homedir must
point at the root of the site and not a sub-directory thereof.
Homedir = C:/www/
|
| |
| Homefile [1] |
Syntax: |
Homefile = relative-url |
| Category: Basic |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Sets the initial document for the start of a scan (relative to
Homeurl and Homedir).
Homefile = index.html
|
| |
| Homeurl [1] |
Syntax: |
Homeurl = absolute-url |
| Category: Basic |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Sets the base-URL for the start of a scan. Do not append
additional directory or file names to the URL (use Homefile instead).
Homedir must point at the root of the target website.
Homeurl = http://www.example.com/
|
| |
| Hostalias [1] |
Syntax: |
Hostalias from-absolute-url to-absolute-url |
| Category: CustomScan |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Establishes synonyms for the same host.
Hostalias http://www2.example.com/ http://www.example.com/
|
| |
| Hostname |
Syntax: |
Hostname = hostname |
| Category: External |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Sets the Hostname to use for HELO messages. Only used when
active mailto: checking is enabled.
|
| |
| Htmlfiles [1] |
Syntax: |
Htmlfiles = file-extension [, file-extension]... |
| Category: File |
Default: |
Htmlfiles = html, shtml, htm |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When using File System Scanning, any file with this extension is
interpreted as an HTML document. When using Network (HTTP) Scanning,
any link with a Content-Type: text/html header is interpreted
as indicating HTML format.
|
| |
| Httpauth |
Syntax: |
Httpauth = env-var |
| Category: Security |
Default: |
Httpauth = REMOTE_USER |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the system Environment variable name to use in conjunction with
the LinkScan access controls and HTTP user authentication. Not
required unless you enable LinkScan Access Controls.
|
| |
| IPv6Prefs [1] |
Syntax: |
IPv6Prefs = [0|4|6|46|64] |
| Category: CustomScan |
Default: |
IPv6Prefs = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Controls IPv6 preferences for the current project. May be configured
to use IPv4 connections only, IPv6 connections only, prefer IPv4
connections, or prefer IPv6 connections. With the default setting
LinkScan will inherit the system preferences.
|
| |
| Indexoptions [1] |
Syntax: |
Indexoptions = boolean |
| Category: File |
Default: |
Indexoptions = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When Indexoptions = 1 and File System Scanning is enabled,
LinkScan will create directory listing when no Defaultpages
(e.g. index.html) are present.
|
| |
| Insertlink [1] |
Syntax: |
Insertlink Insertlink document-match new-document [-|+|*] |
| Category: CustomScan |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
May be used to insert synthetic links into a scanned document.
|
| |
| Jisencode |
Syntax: |
Jisencode = boolean |
| Category: CustomReport |
Default: |
Jisencode = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Enable when scanning Japanese language websites. Pages containing
JIS, Shift-JIS and/or EUC-JP encoded Japanese characters will be
normalized to EUC-JP. See also Displaylang.
|
| |
| Key [1] |
Syntax: |
Key = special-key |
| Category: System |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the LinkScan License Key -- supplied by Elsop.
|
| |
| LicenseNumber [1] |
Syntax: |
LicenseNumber = integer (10-digit) |
| Category: System |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the LinkScan License Number -- supplied by Elsop.
|
| |
| Licensee [1] |
Syntax: |
Licensee = name |
| Category: System |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Name of your Company or Department.
|
| |
| Linespeed [1] |
Syntax: |
Linespeed = integer |
| Category: System |
Default: |
Linespeed = 1 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets a default linespeed for the calculation of document load
times on the Summary/Detail Report.
|
| |
| Linkscancookie |
Syntax: |
Linkscancookie = boolean |
| Category: Security |
Default: |
Linkscancookie = 0 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Define the type of Cookie used by the LinkScan Reporting System
(i.e. linkscan.cgi) for storing user preferences.
0=Permanent cookie; 1=Session cookie; 2=No cookie
|
| |
| Linkscandir [1] |
Syntax: |
Linkscandir = absolute-path |
| Category: System |
Default: |
Linkscandir = Automatically set during installation |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the absolute pathname to the directory in which LinkScan is installed.
|
| |
| Linkscanurl [1] |
Syntax: |
Linkscanurl = absolute-url |
| Category: System |
Default: |
Linkscanurl = Automatically set during installation |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the URL to the directory in which LinkScan is installed.
|
| |
| Longurls |
Syntax: |
Longurls = boolean |
| Category: System |
Default: |
Longurls = 0 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Force LinkScan CGI's to generate long URL's with the Pref parameter.
|
| |
| Mailalias [1] |
Syntax: |
Mailalias expression address [, address]... |
| Category: Dispatch |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Sets associations between Owners matching expression
and a comma separated list of e-mail addresses.
Mailalias Products [email protected], [email protected]
|
| |
| Mailfrom [1] |
Syntax: |
Mailfrom = username |
| Category: External |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the address to use for FROM messages. Only used when
active mailto: checking is enabled.
|
| |
| Mailhost [1] |
Syntax: |
Mailhost = hostname |
| Category: Dispatch |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Sets the default hostname for LinkScan Dispatch reports sent via e-mail.
By default, all reports are mailed to Owner@Mailhost. See
Mailalias if you need more control.
|
| |
| Mailnoerr [1] |
Syntax: |
Mailnoerr = boolean |
| Category: Dispatch |
Default: |
Mailnoerr = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When Mailnoerr = 1 LinkScan Dispatch will e-mail reports
to their respective Owners even when no broken links were detected.
|
| |
| Mailto [1] |
Syntax: |
Mailto = integer |
| Category: Security |
Default: |
Mailto = 0 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Enable Mailto forms on the LinkScan reports. Setting Mailto=2
will add a comment box to the form. The Mailto option requires
that the LinkScan to Email
Interface be configured.
|
| |
| Mapdefaulttitle [1] |
Syntax: |
Mapdefaulttitle [ string ] [ !PATH | !FILE ] [ string ] |
| Category: SiteMap |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Defines a default Title for SiteMap/TapMap; used when no actually
<title> tags were seen. The special tokens !PATH and
!FILE are replaced with the actual pathnames or filenames,
respectively.
Mapdefaulttitle = No title tags in !PATH
|
| |
| Mapext [1] |
Syntax: |
Mapext boolean |
| Category: SiteMap |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Include External Links on the SiteMap.
Mapext = 1
|
| |
| Mapfiles [1] |
Syntax: |
Mapfiles = file-extension [, file-extension]... |
| Category: File |
Default: |
Mapfiles = map |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When using File System Scanning, any file with this extension is
interpreted as a server-side image map file.
|
| |
| Maphide [1] |
Syntax: |
Maphide relative-path-expression |
| Category: SiteMap |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Documents matching relative-path-expression are hidden from
the SiteMap and TapMap.
Maphide .*messages/
|
| |
| Mapinclude [1] |
Syntax: |
Mapinclude relative-path-expression |
| Category: SiteMap |
Default: |
Mapinclude HTML Documents |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Documents matching relative-path-expression are included
in the SiteMap and TapMap. By default, only HTML documents are
included; links to images and other file types are hidden. You
may include all files by using, for example:
Mapinclude .*
|
| |
| Mapmove [1] |
Syntax: |
Mapmove relative-document-path, new-parent-relative-path, position [, new-title] |
| Category: SiteMap |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Used to customize the SiteMap and TapMap by forcing specific
documents to assigned to different positions in the hierarchy.
Mapmove child.html, parent.html, 1
|
| |
| Maptitle [1] |
Syntax: |
Maptitle relative-document-path, string |
| Category: SiteMap |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Replace the actual title of document relative-document-path with string.
|
| |
| Masterhist |
Syntax: |
Masterhist = boolean |
| Category: External |
Default: |
Masterhist = 1 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
When Masterhist = 1 LinkScan maintains the status of external
links in a global history file shared between all Projects.
|
| |
| Masterport |
Syntax: |
Masterport = port# |
| Category: System |
Default: |
Masterport = 8010 |
| Type: Single-valued |
Used by: |
linkscan.sys,linkscan.cfg |
| |
Defines a TCP/IP Port Number on your computer. LinkScan uses this
Port and the following "N" ports for its own interprocess communication.
"N" is defined by the maximum of Slave processes used during the scan.
You will not normally need to change this unless the default Port is
being used by another application.
|
| |
| Maxbadhours [1] |
Syntax: |
Maxbadhours = integer |
| Category: External |
Default: |
Maxbadhours = 0 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Do not check Bad External links more frequently than once every
integer hours.
|
| |
| Maxcgi [1] |
Syntax: |
Maxcgi = integer |
| Category: Scope |
Default: |
Maxcgi = 100 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Controls the maximum number of times any given base URL
with be tested with different query strings. Avoid the
potential for excessive and potentially infinite iteration
over many query strings. See also the Taglimit option provides
even finer control.
|
| |
| Maxclicks [1] |
Syntax: |
Maxclicks = integer |
| Category: Scope |
Default: |
Maxclicks = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Limit the scope of a scan to "N" click levels deep.
|
| |
| Maxdirlevels [1] |
Syntax: |
Maxdirlevels = integer |
| Category: File |
Default: |
Maxdirlevels = 10 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Do not scan the File System more than integer directory
levels deep when scanning for Orphaned Files. Avoids recursion
issues with Symlinks on Unix systems.
|
| |
| Maxdns [1] |
Syntax: |
Maxdns = integer |
| Category: External |
Default: |
Maxdns = 3 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Defines the maximum number of HTTP redirections to be followed
when fetching a given URL (detect/protect potential loops).
|
| |
| Maxdocbytes [1] |
Syntax: |
Maxdocbytes = integer |
| Category: CustomScan |
Default: |
Maxdocbytes = none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Defines the maximum size of a document body that will be fetched
when scanning a remote server. Typically used to prevent excessive
delays while LinkScan fetches very large PDF documents.
|
| |
| Maxftp [1] |
Syntax: |
Maxftp = integer |
| Category: External |
Default: |
Maxftp = 25 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Do not test more than integer links to any one FTP server.
This prevents excessive/inappropriate loads on the remote server.
The FTP protocol carries significantly more overhead than HTTP.
|
| |
| Maxgoodhours [1] |
Syntax: |
Maxgoodhours = integer |
| Category: External |
Default: |
Maxgoodhours = 4 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Do not check Good External links more frequently than once every
integer hours.
|
| |
| Maxhist |
Syntax: |
Maxhist = integer |
| Category: External |
Default: |
Maxhist = 10 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
For External links, store the last integer results in the
History file.
|
| |
| Maxredir |
Syntax: |
Maxredir = integer |
| Category: CustomScan |
Default: |
Maxredir = 5 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Defines the maximum number of HTTP redirections to be followed
when fetching a given URL (detect/protect potential loops).
|
| |
| Maxservertries [1] |
Syntax: |
Maxservertries = integer |
| Category: External |
Default: |
Maxservertries = 25 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
When validating External links, abort testing of all links to
a host that has already recorded more than integer errors.
This prevents LinkScan from attempting to check many links to
a host that may be temporarily unavailable (and hence multiple
timeout delays).
|
| |
| Maxsev [1] |
Syntax: |
Maxsev = severity |
| Category: Dispatch |
Default: |
Maxsev = 3 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Defines the maximum severity level to be included in the LinkScan
Dispatch Reports.
|
| |
| Mirrorurl [1] |
Syntax: |
Mirrorurl = absolute-url |
| Category: CustomScan |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Instructs LinkScan to send all HTTP requests to the Mirrorurl
address even though, logically, it behaves as if it is scanning a
different host.
Mirrorurl = http://staging.example.com/
|
| |
| Nameservers [1] |
Syntax: |
Nameservers = ipaddress [, ipaddress]... |
| Category: External |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets default name servers. Only used when active mailto: checking
is enabled. See references.
|
| |
| Noindex [1] |
Syntax: |
Noindex = boolean |
| Category: CustomScan |
Default: |
Noindex = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Ignore links contained within <NOINDEX></NOINDEX>
code blocks unless they are unique (i.e. new and not
already seen during the current scan.
|
| |
| Noprojectlist |
Syntax: |
Noprojectlist = boolean |
| Category: Security |
Default: |
Noprojectlist = 0 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Noprojectlist = Prompt for Project versus displaying drop-down list
|
| |
| Nostaticmenu |
Syntax: |
Nostaticmenu = boolean |
| Category: Security |
Default: |
Nostaticmenu = 0 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
When Nostaticmenu = 1 disable the LinkScan Toolbar on command-line generated reports.
|
| |
| Notapmapoptions |
Syntax: |
Notapmapoptions = boolean |
| Category: Security |
Default: |
Notapmapoptions = 0 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
When Notapmapoptions = 1 disable the Options Menu on LinkScan/TapMap.
|
| |
| Onlyorphans [1] |
Syntax: |
Onlyorphans relative-path-expression |
| Category: File |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Only scan directories matching relative-path-expression
for Orphaned Files. Include the trailing slash on directory
references.
|
| |
| Organization |
Syntax: |
Organization = string |
| Category: Basic |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Name of the organization/department associated with this Project
(will appear on the subsequent reports).
|
| |
| Owneralias [1] |
Syntax: |
Owneralias expression owner-name |
| Category: Owner |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Used to manipulate Ownernames. Normally used in conjunction with
Ownertags. See references.
|
| |
| Ownerq [1] |
Syntax: |
Ownerq relative-path-expression owner-name |
| Category: Owner |
Default: |
Ownerq *1 |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Set document ownership. Documents with pathnames matching
relative-path-expression are assigned to owner-name.
Unlike the Owner command which operates on the pathname portion
of the URL, Ownerq operates on the full URL including any query
string.
Ownerq somescript\?.*SomeOwnerParam=([^&]+) $1
|
| |
| Ownertags [1] |
Syntax: |
Ownertags = expression |
| Category: Owner |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Used to assign document Ownership based on META tags. See references.
|
| |
| Perlpath [1] |
Syntax: |
Perlpath = absolute-path |
| Category: System |
Default: |
Perlpath = Automatically set during installation |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Absolute pathname to the Perl executable on your computer.
|
| |
| Profiler [1] |
Syntax: |
Profiler = integer |
| Category: CustomScan |
Default: |
Profiler = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Enables the LinkScan Profiler.
Profiler = 1 # Profile internal links
|
| |
| Profilerlog [1] |
Syntax: |
Profilerlog = integer |
| Category: CustomScan |
Default: |
Profilerlog = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Enables a detailed trace of the LinkScan Profiler results.
The log is written to: .../LinkScan/Projectname/data/linkscan.red
|
| |
| Profilermax [1] |
Syntax: |
Profilermax = integer |
| Category: CustomScan |
Default: |
Profilermax = 200 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Sets the trigger level threshold for the LinkScan Profiler.
|
| |
| Projectdesc |
Syntax: |
Projectdesc = string |
| Category: Basic |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
A description for this Project (will appear on the subsequent reports).
|
| |
| Proxymatch [1] |
Syntax: |
Proxymatch [http|https|*] [host:port|direct] ["user:pass"] host1, host2... |
| Category: System |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.sys |
| |
The Proxymatch command may be used to configure complex
proxy rules that are not handled by the (simpler)
Proxyserver/Proxyport commands. Multiple Proxymatch
commands are evaluated in the order specified with
the last match assuming precedence.
|
| |
| Redirect |
Syntax: |
Redirect relative-path-expression absolute-url-expression |
| Category: File |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Used to simulate a webserver configured redirection when using
File System Scanning.
Redirect documents/oldpage.html http://www.example.com/html/newpage.html
|
| |
| Relaxanchor |
Syntax: |
Relaxanchor = boolean |
| Category: CustomScan |
Default: |
Relaxanchor = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Enable relaxed anchor checking. Anchor checks are made case insensitive.
Superflous '#' characters at the beginning of the NAME attribute are ignored.
|
| |
| Reportsdir [1] |
Syntax: |
Reportsdir = absolute-path |
| Category: CustomReport |
Default: |
Reportsdir = Automatically set during installation |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the path to the directory in which the LinkScan reports are created.
Only used when generating reports from the command-line.
|
| |
| Scriptexclude [1] |
Syntax: |
Scriptexclude expression |
| Category: JavaScript |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
JavaScript code blocks matching expression are discarded
and not scanned for links.
|
| |
| Scriptmatch [1] |
Syntax: |
Scriptmatch expression |
| Category: JavaScript |
Default: |
Scriptmatch (\w+://\S+|\S+/$|\S+\?\S+|\S+\.([a-z]{2,3}|[js]?html?|Z)$) |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Patterns used to control the scanning of JavaScript constructs.
You should not normally need to change these from their defaults.
|
| |
| Scriptnomatch [1] |
Syntax: |
Scriptnomatch expression |
| Category: JavaScript |
Default: |
Scriptnomatch .*([\(\)\[\]\{\}\']|document\.\S+|\.(src|com)$) |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Patterns used to control the scanning of JavaScript constructs.
You should not normally need to change these from their defaults.
|
| |
| Selecturl [1] |
Syntax: |
Selecturl expression |
| Category: JavaScript |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
The contents of select tags (drop-down lists) with name
attributed matching expression are processed as links versus
arbitrary data.
|
| |
| Sendmailpath [1] [2] |
Syntax: |
Sendmailpath = absolute-path |
| Category: Dispatch |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the absolute pathname to the sendmail executable on your computer.
|
| |
| Sessionmatch [1] |
Syntax: |
Sessionmatch = expression |
| Category: CustomScan |
Default: |
none |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Used to capture, save, manipulate items such as session numbers.
See references.
|
| |
| Slaves1 |
Syntax: |
Slaves1 = integer |
| Category: System |
Default: |
Slaves1 = 3 |
| Type: Single-valued |
Used by: |
linkscan.sys,linkscan.cfg |
| |
Sets the number of simultaneous HTTP connections to be used
when scanning the Internal links.
|
| |
| Slaves2 |
Syntax: |
Slaves2 = integer |
| Category: System |
Default: |
Slaves2 = 3 |
| Type: Single-valued |
Used by: |
linkscan.sys,linkscan.cfg |
| |
Sets the number of simultaneous HTTP connections to be used
when scanning the External links.
|
| |
| Smtphost [1] |
Syntax: |
Smtphost = hostname |
| Category: System |
Default: |
Smtphost = 12 |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the SMTP hostname used for the distribution of emailed
reports (Windows systems only).
|
| |
| Statuscode [1] |
Syntax: |
Statuscode statuscode, severity |
| Category: CustomReport |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Modifies the severity associated with statuscode.
1=Error; 2=Possible Error; 3=Warning; 4=Advisory; 5=Good.
Statuscode = 301,3 # 301 (Moved Permanently) from Error to Warning
|
| |
| Substitute [1] |
Syntax: |
Substitute relative-path-expression expression |
| Category: CustomScan |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Manipulate links on-the-fly. See references.
|
| |
| Substituteraw [1] |
Syntax: |
Substituteraw relative-path-expression expression |
| Category: CustomScan |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Manipulate links on-the-fly. See references.
|
| |
| Substitutescript [1] |
Syntax: |
Substitutescript relative-path-expression expression |
| Category: CustomScan |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Manipulate links on-the-fly. See references.
|
| |
| Taglimit [1] |
Syntax: |
Taglimit relative-path-expression integer |
| Category: Scope |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
When integer links matching relative-path-expression
have been scanned, LinkScan ignores all subsequent matching links.
|
| |
| Tagonce [1] |
Syntax: |
Tagonce relative-path-expression |
| Category: Database |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Links matching relative-path-expression are stored only
once, regardless of how many references are seen. Typically used
to prevent thousands of references to "blank/filler" images
from adding excessive bulk to the LinkScan database.
Tagonce .*blank\.gif$
|
| |
| Timeout1 |
Syntax: |
Timeout1 = integer |
| Category: System |
Default: |
Timeout1 = 20 |
| Type: Single-valued |
Used by: |
linkscan.sys,linkscan.cfg |
| |
Timeout (in seconds) for first attempt to contact site.
|
| |
| Timeout2 |
Syntax: |
Timeout2 = integer |
| Category: System |
Default: |
Timeout2 = 40 |
| Type: Single-valued |
Used by: |
linkscan.sys,linkscan.cfg |
| |
Timeout (in seconds) for second attempt to contact site.
|
| |
| Unsafechar [1] |
Syntax: |
Unsafechar = string |
| Category: Misc |
Default: |
Unsafechar = <>`" |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Unsafe characters. Do not escape these.
|
| |
| Userdata |
Syntax: |
Userdata [123] match-expression expression |
| Category: CustomScan |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Extract user specified data from document (e.g. from META tags).
Userdata 1 (?i)<meta[^>]*emp-badge-no\s*=\s*"(\d+) $1
|
| |
| Userdatafmt |
Syntax: |
Userdatafmt [123] [DHLTX] integer[LRC] caption |
| Category: CustomScan |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Format user specified data.
D=date; H=hot links; L=link; T=truncate to format; X=normal
20R=20 chars right adjusted; 40L=40 chars left adjusted
Userdatafmt 1 X 10R Badge Number
|
| |
| Userdatasub |
Syntax: |
Userdatasub [123] expression expression |
| Category: CustomScan |
Default: |
none |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Perform RegExp manipulations on user data fields.
|
| |
| Weblintoptions [1] [2] |
Syntax: |
Weblintoptions = string |
| Category: System |
Default: |
Weblintoptions = -d extension-markup,extension-attribute |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets command-line options that are automatically passed to weblint.
|
| |
| Weblintpath [1] [2] |
Syntax: |
Weblintpath = absolute-path |
| Category: System |
Default: |
Weblintpath = C:/LinkScan/weblint/weblint |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Sets the full pathname to the weblint executable.
|
| |
| Wildtlds [1] |
Syntax: |
Wildtlds = comma separated list of TLD's |
| Category: System |
Default: |
Wildtlds = com,net |
| Type: Single-valued |
Used by: |
linkscan.sys |
| |
Enable checks for wildcard records in the listed Top Level Domains (TLD's).
Prevents false negatives on DNS lookups caused by TLD wildcard records.
|
| |
| Winhttp |
Syntax: |
Winhttp = boolean |
| Category: Security |
Default: |
Winhttp = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Use the native Microsoft Windows implementation of HTTP.
Useful when "NTLM" authentication required.
|
| |
| Xmeta |
Syntax: |
Xmeta = expression |
| Category: CustomScan |
Default: |
Xmeta = 0 |
| Type: Single-valued |
Used by: |
linkscan.cfg |
| |
Extract an extra meta tag (matching expression) from each HTML
document. Only effective in conjunction with Collectmeta.
|
| |
| Xmlmatch |
Syntax: |
Xmlmatch expression |
| Category: CustomScan |
Default: |
Xmlmatch 0 |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Define patterns for link extraction from XML documents.
|
| |
| Xmlnomatch |
Syntax: |
Xmlnomatch expression |
| Category: CustomScan |
Default: |
Xmlnomatch 0 |
| Type: Multi-valued |
Used by: |
linkscan.cfg |
| |
Define exclusion patterns for link extraction from XML documents.
|
| |
LinkScan for Windows. Reference Manual. Section 26. LinkScan Quick Reference Card
LinkScan Version 12.3
© Copyright 1997-2012
Electronic Software Publishing Corporation (Elsop)
LinkScan™ and Elsop™ are Trademarks of Electronic Software Publishing Corporation