DL-232 - A New Standard

I may never understand how the designers of the RS-232 "standard" for serial communication managed to use 25 wires where only 3 are really necessary. Maybe they made a deal with the companies that make cables, connectors, and switch boxes...I just don't know.

Well, I thought of a few things that the RS-232 standard lacks, and since there are already so many extra signals, a few more can't hurt anybody, right? Heck, let's go for 50-pin connectors and cables and add the follow- ing new signals. (Just to make sure this isn't compatible with any old equipment, all OLD signals are moved up one pin number [carrier detect becomes 9 instead of 8, etc., and pin 25 goes to pin 1]).

  Pin  Name      Description
  ---  ----      -----------
   26  XCAT      Should be connected to chassis of devices. Used with the
		 next two signals, this provides protection against cats who
		 haven't learned not to walk on floppy disks or serial
		 equipment. This signal should supply about 2000 volts (at a
		 VERY low current level; wouldn't want to HURT the cute
		 little thing, just teach it not to walk on anything in the
		 computer room).

   27  CATGND    Cat ground. Used with pin 26. This signal should be connected
		 to another part of the chassis or the tabletop.

   28  CTD       Cat detect.

   29  SD        Self-destruct. This signals causes the device to destroy
		 itself.

   30  SDACK     Self-destruct acknowledge. Acknowledges that the device
		 has destroyed itself.

   31  VADIC     This signal indicates to a computer that the device on the
		 other end is a modem that uses VADIC protocol. (Note: Compu-
		 Center Iowa users should jumper this signal to SD and then
		 buy a decent modem.)

   32  STBIT1    Stutter bits. With pin 33, sets the number of "stutter bits"
		 (0 to 3 of them) to be included before each byte transmitted.
		 This may reduce the number of people who feel inferior to
		 computer equipment by showing them that computers have prob-
		 lems communicating with each other.
   33  STBIT2

   34  CABR      Cable ready. It's not enough to know that the Data Set is
		 ready (DSR) and the Data Terminal is read (DTR). We also need
		 to know that the CABLE connecting them is ready.

   35  GRR       Gremlins ready. Not everybody knows it, but there are little
		 green guys inside most modern computer equipment. Most of the
		 time they sleep, but other times they cause trouble. The next
		 6 signals are for dealing with gremlins.

   36  220A      Used with pin 37, supplies 220 volt power for the gremlins'
		 air conditioning. On hot days when gremlins can't sleep,
		 applying power to these pins may solve your problems.
   37  220B

   38  110H      110 volts, hot side. When the 220 volt power doesn't help
		 and gremlin problems persist, use this with pin 39 to supply
		 110 volts for the gremlins' TV and video game center.

   39  110N      110 volts, neutral side.

   40  MOON      Indicates the phase of the moon. Sometimes solves mysterious
		 problems.

   41  LHI       Pins 41 through 45 can be used to implement the "like" pro-
		 tocol when the normal RTS/CTS protocol isn't enough. This one
		 means "Like HI" and is used to establish a connection.

   42  LHTY2     Like HI to You Too. Acknowledges pin 41.

   43  LLTT      Like Listen To This. Requests permission to send data.

   44  LOK       Like OK. Grants permission to transmit data.

   45  LWOW      Like WOW. Acknowledges receipt of data.

   46  HEY       Pins 46 to 50 may be used to implement the "Eighties" pro-
		 tocol when RTS/CTS and "Like" protocols won't do the job.
		 This signal is similar to RTS (Request to Send).

   47  NP        No Problem. Acknowledges HEY.

   48  HUH?      Signals that data was not received correctly (possibly wrong
		 number of stutter bits).

   49  YEAH      Acknowledges data received.

   50  KMG365    Like YEAH, but for avid Emergency One fans.

That makes 50! Let's hear your suggestions for MORE serial signals. Maybe we can get 100 and REALLY make the cable manufacturers happy.

Try a Free Evaluation Copy of our Product: LinkScan